Gate Valve
A multi-turn valve which has a gate-like disk and two seats to close the valve. The gate moves linearly, perpendicular to the direction of flow.
This type of valve is normally used in the fully opened or fully closed position; it is not suited to throttling applications. Gate valves provide robust
sealing, and are used extensively in the petrochemical industries. This class of valves also includes knife gate valves, conduit gate valves and
wedge gate valves. Knife gate valves have much thinner gates with knife-like edge, making them suited to use with floating solids, e.g., as in the pulp & paper industries. Conduit gate valves have a rectangular disk as the closing element. one
half of the disk is solid, to close the valve, the other has a circular port, which can be used to open the valve.
Wedge gate valves have a wedge-shaped gate which "wedges" between floating seats to close the valve tightly.
1. Cast Steel Gate Valve (Class 150 NPS 42)
Rising Stem, Flexible or Solid Wedge Bolted Bonnet, Welded Seat Ring
Standards Compliance:
Basic Design: API600 or BS1414
Face to Face Dimension: ANSI B16.10
End Flange Dimension: MSS SP-44
Manufacturing to NACE MR-01-75 on request
Body Material
Shell Test(Hydrostatic)
Seal Test(Hydrostatic)
Seal Test(Air)
WCB
450psi
315psi
80psi
WC6
450psi
319psi
CF8M
425psi
303psi
2. Cast Steel Gate Valve (Class 300 NPS 26)
Rising Stem, Flexible or Solid Wedge Bolted Bonnet, Welded Seat Ring
Standards Compliance:
Basic Design: API600 or BS1414
Face to Face Dimension: ANSI B16.10
End to End Dimension: ANSI B16.10
End Flange Dimension: MSS SP-44
Manufacturing to NACE MR-01-75 on request
Body Material
Shell Test(Hydrostatic)
Seal Test(Hydrostatic)
Seal Test(Air)
WCB
1125psi
814psi
80psi
WC6
1125psi
825psi
CF8M
1100psi
792psi
3. Class 150 Cast Steel Gate Valve
OS&Y, Rising Stem, Flexible Wedge Bolted Bonnet, Welded Seat Ring
Standards Compliance:
Basic Design: API600, BS1414
Face to Face Dimension: ASME/ANSI B16.10
End Flange Dimension: ASME/ANSI B16.5
B.W.Ends: ASME/ANSI B16.25
Manufacturing to NACE MR-01-75 on request
